Filter
Top Products
3-30
Using the Interface Card with NetWare
R4C3610 Adm/G
Rev. C
A5 size Chap3.fm
8/4/00 Pass 0
L
Proof Sign-off:
KOW M.Arai K.Nishi
K. Nishi
J.Hoadley
Frame type:
Select appropriate frame type from the following:
Auto,
Ethernet 802.2, Ethernet 802.3, Ethernet II
, or
Ethernet
SNAP
.
Tree name:
Leave as is.
Context:
Leave as is.
Primary printserver name:
Enter the print server name which you have created using
PCONSOLE or NWADMIN.
Printer port number:
Enter the same port number you assigned to the print server
using PCONSOLE or NWADMIN.
8. After making the settings, click
OK
.
The Password dialog box appears.
9. Enter your password (up to 20 characters) and click
OK
to
save settings. If you are entering a password for the first time,
click
Change
and set the password. For more information
about passwords, see “About passwords” on page 9-7.
Follow the on-screen instructions. After updating is complete,
refresh the configuration by selecting
Refresh
from the View
menu.
c
Caution:
Since it takes 2 or 3 minutes to send new settings to the
interface card, you must wait until the on-screen message
appears before turning off your printer.
Note:
Since the new settings are sent to the interface card, you must wait
until this message appears before turning off the printer.