Epson C82364 Network Card User Manual


 
2
Setting the IP Address
2-21
R4C3610 Adm/G
Rev. C
A5 size CHAP2.FM
8/4/00 Pass 0
R
Proof Sign-off:
KOW M.Arai K.Nishi
K. Nishi
J.Hoadley
3. Click
TCP/IP
under Network on the Configuration menu to
view the TCP/IP setting screen.
Note:
The network administrator must confirm any changes made to the
IP address settings.
4. Select the "Get IP address" method from the following list:
Manual
,
RARP, BOOTP,
or
DHCP.
Note:
To use RARP, BOOTP, or DHCP, a server for each protocol is
necessary. If there is no server which corresponds to the protocol, do
not use it. See your server documentation for setting details.
5. Select
ON
or
OFF
in the
Set by PING
list box. Select
ON
to set
the IP address with arp/ping commands. Select
OFF
when
setting the IP address with EpsonNet WinAssist/MacAssist/
WebAssist to prevent unexpected changes of the IP address.