Filter
Top Products
3
Using the Interface Card with NetWare
3-45
R4C3610 Adm/G
Rev. C
A5 size Chap3.fm
8/4/00 Pass 0
R
Proof Sign-off:
KOW M.Arai K.Nishi
K. Nishi
J.Hoadley
Instructions for Using a Dial-Up Network
This section explains about using a dial-up network.
Note:
The primary server described in this manual indicates a primary time
server which offers time to the workstations on the network.
Using a dial-up network in each mode
Print Server mode
You must use a dedicated dial-up line.
Since polling is performed on the file server in the print server
mode, no vicarious response by the router is possible. No dial-
up connection is possible in this mode.
Remote Printer mode
In Remote Printer mode, use of a router with a vicarious
response function allows the primary server to be installed at
the dial-up destination. However, an extra account might be
generated when the primary server is down. To avoid extra
charges, we recommend to connect via a dedicated dial-up
line.
Follow the instructions below to use a dial-up line.