2
Setting the IP Address
2-1
R4C3610 Adm/G
Rev. C
A5 size CHAP2.FM
8/4/00 Pass 0
R
Proof Sign-off:
KOW M.Arai K.Nishi
K. Nishi
J.Hoadley
Chapter 2
Setting the IP Address
To use the interface card with TCP/IP, you need to assign it an IP
address using EpsonNet WinAssist, EpsonNet MacAssist, or the
arp/ping command.
The IP address should be set in the following cases:
❏
When configuring the interface card using EpsonNet
WebAssist (the utility that is pre-installed in the interface
card)
❏
Remote (LPR on IP) printing from NetWare 5
❏
TCP/IP (via EpsonNet Direct Print) printing from Windows
98, Windows 95, Windows 2000, and Windows NT 4.0
❏
TCP/IP (LPR port) printing from Windows 2000, Windows
NT 4.0, and Windows NT 3.51
❏
TCP/IP (lpr port) printing from OS/2 Warp and UNIX
❏
Internet printing using EpsonNet Internet Print on Windows
98, Windows 95, and Windows NT 4.0
❏
Internet printing from Windows 2000
❏
Managing printers using EpsonNet WebManager via TCP/IP