Filter
Top Products
[S] OFF LINE
The printer is off line and not in the SelecType mode. In this
status, you can enter SelecType mode by pressing the
SelecType
button.
[E] OUT OF PAPER
No paper cassette is installed, or there is no paper in the
standard paper cassette and the optional lower paper cassette
(if installed), or the paper set lever is in the manual position
and you are not feeding pages correctly. Insert more paper
into the selected paper cassette or manually feed a sheet of
paper into the printer. See Chapter 4 for more information on
loading paper.
[E]
PAPER ENTRY JAM
Paper is not feeding into the printer from the specified
cassette or has jammed on its way into the printer. If the
paper is jammed at the paper cassette, open the printer case,
remove the jammed paper from the standard paper cassette or
optional paper cassette and then close the printer. See the
PAPER ENTRY JAM section later in this chapter for more
information.
[E] PAPER EXIT JAM
Paper is jammed inside the paper path. You need to open the
printer and clear the jammed paper as described later in this
chapter.
[S] PRINTING
The printer has received data and is printing.
[S] PRINTING TEST
The printer is printing the test page.
[S] PROCESSING
The printer is processing data.
Troubleshooting 7-3