Filter
Top Products
Problem
Solution
A black page is
printed.
The printed image
is light or faint.
The imaging cartridge may need to be
replaced. Replace the imaging cartridge as
Described in Chapter 6.
The print density knob may not be set
correctly. Raise the printer cover and turn
the print density knob clockwise. See
Chapter 2 for information on adjusting the
print density knob.
If the LOW ON TONER warning appears,
replace the imaging cartridge as described
in Chapter 6.
The transfer charger wire may be dirty.
Clean the wire as described in Chapter 6.
Your paper may be moist or damp.
Printing is sensitive to moisture absorbed
by the paper. The higher the moisture
content in the paper, the lighter the
printed output. Do not store your paper in
a humid or damp environment.
If the problem persists, replace the imaging
cartridge as described in Chapter 6.
Troubleshooting
7-31