Filter
Top Products
Connecting the Printer to Your Computer
5. Press once and then press until APPLETALK
appears on the display.
6. Press once. SELECTED appears briefly on the display;
then APPLETALK* appears. The asterisk (*) shows that
AppleTalk is selected.
7. Press once, then once, then once.
8. Press until SAVE LEVEL 2 appears on the display.
9. Press once.
10. Turn the printer off.
CAUTION: If you connect an AppleTalk cable, never
operate the printer with the SelecType INTERFACE
option set to any other interface. Failure to use the
APPLETALK setting may leave your printer inoperable or
bring down your entire system.
Now connect the AppleTalk interface cable.
1.
Turn off both the printer and the Macintosh and unplug the
printer.
Testing and Connecting Your Printer
2-17