Filter
Top Products
Problem
Solution
The printer does not
print or stops
printing (continued).
The ON LINE light is
off.
The printer stops
Replace the component specified. See
printing and the
Chapter 4 for paper loading instructions.
display reads OUT
See Chapter 6 for imaging cartridge
OF PAPER or LOW
replacement instructions. After replacing
ON TONER.
the component, close the printer.
The printout is not
what you expect.
The font you
selected with
software commands
cannot be printed.
The font you selected with your software
may not be available. Be sure you have
selected the correct font.
Characters not
belonging to the
selected symbol set
are being printed.
The printer is off line. Press the ON LINE
button once to set the printer on line (the
ON LINE light comes on).
The correct symbol set may not be
selected. Specify the desired symbol set
(containing international characters or
symbols) with your software.
7-20 Troubleshooting