Filter
Top Products
Connecting the Printer to Your Computer
Connecting to the RS-422 serial interface cable
Follow these steps to connect the
RS-422
serial interface cable:
1.
Turn off both the printer and computer. Then unplug the
power cord from the electrical outlet.
2. Plug the cable connector securely into the CH S1 serial
interface as shown below.
3. Plug the other ends of the cable into your computer. (Fasten
the connector screws to the interface, if required.)
This completes the connection of the RS-422 serial interface cable.
Before you can use the printer, make sure you have set the printer
for
RS-422
serial communication. You may need to change some
interface settings with the SelecType INTERFACE option in Level
2. Be sure to save the new setting with the SAVE LEVEL 2 option.
See Chapter 3 for instructions on changing the serial interface
settings to work with your computer.
2-24
Testing and Connecting Your Printer