Filter
Top Products
Connecting the Printer to Your Computer
2.
Plug the AppleTalk cable connector securely in the CH S1
connector, as shown below.
3.
Plug the other end of the cable into your Mac.
Connecting the parallel interface cable
The EPL-7500 is set up at the factory for parallel communication.
If your computer has a parallel interface and you have a suitable
shielded cable, you can connect to most computers immediately.
Follow these steps to connect the parallel interface cable:
1.
Turn off both your printer and computer. Then unplug the
power cord from the electrical outlet.
2-18
Testing and Connecting Your Printer