Filter
Top Products
4-2
SelecType
Flamingo
Rev. C
A5 size SELEC.FM
11/5/98 Pass 0
L
Proof Sign-off:
M.Takata _______
K.Nishi _______
K.Pipa _______
When to Use SelecType
In general, use SelecType only for settings you cannot make in
your application software or printer driver, including the
following:
❏ Changing the emulation modes and selecting the IES
(Intelligent Emulation Switching) mode
❏ Specifying a channel and configuring the interface
❏ Choosing the size of the memory buffer used to receive data
Keep in mind the following when using SelecType settings:
❏ A number of SelecType settings can also be made using the
OneTouch modes and printer driver.
❏ Application programs may send commands to the printer that
override SelecType settings. If you are not getting the results
you expect, check your application software settings.
❏ To see the current SelecType settings, print a status sheet.
❏ A map of all available SelecType menus is included in
Appendix E.
Note:
Several SelecType settings that cannot be made with your application
software or printer driver can be made with the Remote Control Panel
utility, depending on your PC’s operating system. For more information,
ask your printer’s administrator.