Filter
Top Products
C-2
Command Summary
Flamingo
Rev. C
A5 size APPCOMM.FM
11/5/98 Pass 0
L
Proof Sign-off:
M.Takata _______
K.Nishi _______
K.Pipa _______
Your printer has the ability to emulate the following printers depending on
the printer emulation mode:
LJ-4 Hewlett-Packard LaserJet 4 (PCL5e)
ESC/P2 EPSON LQ-570 (24-pin)
FX EPSON FX-870/1170, or LX-100 (9-pin)
GL/2 Hewlett-Packard GL/2 graphics language
In addition, the following printer control languages are supported:
PJL Printer Job Language
EJL EPSON Job Control Language
This appendix lists the printer commands for these modes. Most of the
commands closely emulate the original printer or the control language;
however, some have operational differences because the printers use
different technologies. Additional information is provided in the
descriptions of control commands with these differences.
For more information on emulation modes, refer to the following sections.
“Emulation Menu” on page 4-8
Appendix B, “Symbol Sets”
LaserJet 4 (LJ4) Emulation Commands
This section lists the printer commands supported in the LJ4 emulation
mode. For more information on printer commands, see Hewlett- Packard's
LaserJet 4 reference manual.
Job control
Reset ESC E
Number of copies ESC &l#X
Universal exit language ESC%#X
Long-edge (left) offset registration ESC &l#U
Short-edge (right) offset registration ESC &l#Z
Unit of measure ESC &u#D
Simplex/Duplex print ESC &l#S