Filter
Top Products
3
Options
3-13
Flamingo
Rev. C
A5 size OPTIONS.FM
11/5/98 Pass 0
R
Proof Sign-off:
M.Takata _______
K.Nishi _______
K.Pipa _______
6. After removing the protective cover from the cord, plug the
cord of the Duplex Unit into the appropriate connector at the
back of the printer.
After installing
1. Reconnect any interface cables you removed.
2. Make sure the printer is turned off. Plug the power cord into
an electrical outlet.
3. Turn on the printer.
To confirm that the Duplex Unit is installed correctly, print a
status sheet. If the unit is not listed on the status sheet, make sure
the cable connecting the Duplex Unit to the printer is connected
securely.
Removing the Duplex Unit
To remove the Duplex Unit, follow the instructions below.
Before removing
1. Turn off the printer.