Filter
Top Products
2-8
Control Panel
Flamingo
Rev. C
A5 sizeCONPANE.FM
11/5/98Pass 0
L
Proof Sign-off:
M.Takata _______
K.Nishi _______
K.Pipa _______
OneTouch mode 2
To enter OneTouch mode 2, press the
SelecType
button
(repeatedly if necessary) until the indicator light next to RITech
comes on, indicating the printer is in OneTouch mode 2. The
current OneTouch mode 2 settings for RITech, Copies, MP Tray
Size, and Toner Save Mode are shown on the display in this order.
RITech
Turns the RITech setting on or off. RITech produces smoother and
crisper lines, text and graphics. If you change this setting, you can
check the print quality with the RITech setting by printing a status
sheet from the SelecType Test Menu.
Copies
Specifies the number of copies to be printed, up to 999.
MP Tray Size
Allows you to set the paper size for the MP tray. If you use the
optional Envelope Feeder, you can set the paper size for the
Envelope Feeder, instead.
Toner Save Mode
Turns the Toner Save Mode on or off. When turned on, the printer
saves toner by substituting a gray shade for the black inside
characters. The characters are outlined in full black on the right
and lower edges
Making OneTouch settings
To make OneTouch settings, access one of the modes as described
above and press the button located under the setting you want to
change to cycle forward through the available options. You can
also cycle backward through available options by holding down
ALT (SelecType)
while pressing the button under the setting you
want to change.