Filter
Top Products
4
SelecType
4-25
Flamingo
Rev. C
A5 size SELEC.FM
11/5/98 Pass 0
R
Proof Sign-off:
M.Takata _______
K.Nishi _______
K.Pipa _______
Pens 0 through 6
Allows you to set the thickness of the ”pens” used to make the
printout. There are two pens in the LJ4GL2 mode, and seven pens
in the GLlike mode for which you can set the thickness.
Before you start printing in the GL/2 mode
You may need to change the printer settings, depending on your
output needs. Check the printer’s settings to make sure they
match the data you are trying to print.
Paper size: Printer’s paper size setting
Driver (plotter selection): HP-GL/2 or HP-GL
Pen configuration: Pen thickness
Plot origin: Center or Corner
Orientation: GLlike offers landscape only
LJ4GL2 offers landscape and portrait
If you need to configure the printer settings, first switch the
emulation mode (see “Emulation Menu” on page 4-8), then
change the settings using the printer driver, or SelecType.
c
Caution:
Settings or data saved in the printer RAM (such as downloaded
fonts) may be erased when you change the emulation mode.
PS3 Menu
This menu is only available if the optional Adobe PostScript 3 Kit
has been installed.