Filter
Top Products
3-30
Options
Flamingo
Rev. C
A5 size OPTIONS.FM
11/5/98 Pass 0
L
Proof Sign-off:
M.Takata _______
K.Nishi _______
K.Pipa _______
3. Push it straight into the printer until it clicks firmly into place.
After installing
1. Reconnect any interface cables you removed.
2. Make sure the printer is turned off. Plug the power cord into
an electrical outlet.
3. Turn on the printer.
To confirm that the Envelope Feeder is installed correctly, print a
status sheet. If the feeder is not listed on the status sheet, try
reinstalling it.
Removing the Envelope Feeder
Note:
❏
When replacing the imaging cartridge or clearing a paper jam, make
sure to temporarily remove the Envelope Feeder before opening cover
A.
❏
Always have either the Envelope Feeder or the MP tray installed. If
neither of them are installed, the message
Set MP Tray
appears on
the control panel.
To remove the Envelope Feeder, follow the instructions below.