Filter
Top Products
4-28
SelecType
Flamingo
Rev. C
A5 size SELEC.FM
11/5/98 Pass 0
L
Proof Sign-off:
M.Takata _______
K.Nishi _______
K.Pipa _______
Auto CR
This specifies whether the printer performs a carriage-return/
line-feed (CR-LF) operation whenever the printer position goes
beyond the right margin. If this setting is off, the printer does not
print any characters beyond the right margin and does not
perform any line wrapping until it receives a carriage-return
character. This function is handled automatically by most
software applications.
Auto LF
If you set this option to
Off
, the printer does not send an automatic
line-feed (LF) command with each carriage-return (CR). If this is
set to
On
, a line-feed command is sent with each carriage-return.
Set to
On
if your text lines overlap.
Bit Image
If you set this parameter to
Dark
or
Light
, the printer is able to
emulate the graphics densities set with the printer commands. If
you select
Dark
, the bit image density is high, and if you select
Light
, the bit image density is low.
If you select the
BarCode
setting, the printer converts bit images
to bar codes by automatically filling in any vertical gaps between
dots. This produces unbroken vertical lines that can be read by a
bar code reader. This mode will reduce the size of the image being
printed, and may also cause some distortion when printing bit
image graphics.
ZeroChar
Selects whether the printer prints a slashed or unslashed zero.
This is useful for distinguishing between an uppercase O and a
numeric 0 when printing program listings, for example.