Filter
Top Products
3
Options
3-41
Flamingo
Rev. C
A5 size OPTIONS.FM
11/5/98 Pass 0
R
Proof Sign-off:
M.Takata _______
K.Nishi _______
K.Pipa _______
3. Plug the cord of the Multibin Unit into the appropriate
connector on the back of the printer.
4. Reconnect any interface cables you removed.
5. Make sure the printer is turned off. Plug the power cord into
an electrical outlet.
6. Turn on the printer.
To confirm that the Multibin Unit is installed correctly, print a
status sheet by pushing the
Enter
button on the control panel two
times while the printer is on line. If the unit is not listed on the
status sheet, make sure the cable connecting the Multibin Unit to
the printer is connected securely.
Removing the Multibin Unit
Follow the instructions below.
Before removing
1. Turn off the printer.
2. Unplug the printer’s power cord from the electrical outlet.