Filter
Top Products
5-22
Troubleshooting and Maintenance
Flamingo
Rev. C
A5 size TROUBLE.FM
11/5/98 Pass 0
L
Proof Sign-off:
M.Takata _______
K.Nishi _______
K.Pipa _______
Make sure that your software is properly set up for your printer.
The imaging cartridge may be empty. Replace it as described in
“Replacing the Imaging Cartridge” on page 5-36.
The printer doesn’t print and the On Line light is off.
Press the
On Line
button once to put the printer on line (the On
Line light comes on).
A font selected with software commands won’t print.
The selected font is not installed in your printer. Be sure you have
installed the correct font. See Appendix D, “Working with Fonts”
for more information.
Some or all of the output is garbled.
Make sure that both ends of the interface cable are plugged in
securely.
Make sure you use a double-shielded, twisted-pair parallel
interface cable no longer than six feet in length.
The Image Optimum setting may be set to
Auto
or
On
. If it is,
certain unexpected fonts may be printed to increase the printing
speed. Turn the Image Optimum setting off in the printer driver
or SelecType Config Menu.
The emulation setting for that port may not be correct. Specify the
correct emulation mode on the SelecType Emulation Menu.
If the printer still does not print correctly, contact your dealer or
a qualified service person.