Filter
Top Products
20 Using the Projector
If you press and hold the
Shift button on the projector’s control panel
and then press the
Aspect button while you are in Through mode or
Squeeze Through mode, you can move the image to one of the
following 3 positions:
Adjusting the Tracking and Synchronization
If you’re projecting from a computer and displaying an image that
contains a lot of detail (such as the text of a letter), you may notice one
or more vertical stripes or bands, or some of the characters may look
heavy or blurred. You can increase the clarity by pressing the
Auto
button on the remote control. This resets the projector’s tracking,
sync, and position settings.
If further adjustment is needed, you can correct the image manually
using the
Tracking and Sync options in the Video menu. (See
page 31.)
Auto button
Incorrect tracking Incorrect sync