Filter
Top Products
2 Welcome
Supported Devices
You can connect the projector to any of the following video sources:
VCR, DVD player, DTV decoder, HDTV tuner, videodisc player,
cable/satellite box, TV, video game console, audio/video receiver,
camcorder, personal video recorder, digital camera, or laser disc
player.
The projector supports composite video, S-Video, and component
video, and it automatically senses the video format (HDTV, NTSC,
PAL, or SECAM).
It can also be connected to a desktop or laptop PC, or Apple
®
Macintosh,
®
Power Macintosh
™
series, PowerBook
®
computers,
iMac
™
and iBook
™
series systems.
The Quick Setup sheet explains how to connect your projector to your
other equipment. See the following section to see which cables are
required.
Cable Requirements
The projector does not come with any cables. However, you may
already have the ones you need or you can purchase them from
EPSON (as described on pages 3 and 4). Refer to the list below to see
which cables you need for your setup:
■ To receive a composite video signal, you need an RCA video
cable. (One is usually provided with your video device.)
■ To receive an S-Video signal, you need an S-Video cable. (One is
usually provided with your video device.)
■ To receive a component video signal from a DVD player or other
video device, you need a component video cable.
■ If you want to connect more than one component video source,
you need a VGA-to-component video cable.
■ To connect a VGA computer to the projector, you need a VGA
computer cable.
■ To connect a computer with a DVI interface, you need a
DVI/analog interface cable.