Filter
Top Products
Appendix A: Connecting the Projector to a Computer 63
Connecting to a DVI Computer Source
The projector’s DVI (Digital Visual Interface) port receives pictures
directly from your computer in digital format. This lets the projector
display images of greater clarity than can be achieved using a standard
analog VGA connection. You’ll need one of the optional DVI cables
described on page 4.
Follow these steps:
1. Make sure your computer and the projector are turned off.
2. If you are connecting to a desktop computer, disconnect the
monitor cable from the video port on the back of the computer.
3. Connect one end of the DVI cable to the projector’s
DVI port.
4. Connect the other end of the cable to your computer’s video port.
5. Tighten the screws on the connectors.
Now you are ready to plug in your projector and turn it on. See page 8
for instructions.
Be sure to check the setting for the
Input A port in the Setting menu
(as described on page 33) to make sure it is correct for your computer.
DVI port