Filter
Top Products
38 Fine-tuning the Projector
If the projector is connected to a computer, you see these settings:
The life span of the lamp is about 3000 hours. If the number shown is
close to 3000, make sure you have a spare lamp handy.
After you change the lamp, you need to reset the lamp timer. (See
“Replacing the Lamp” on page 42 and “Resetting the Lamp Timer”
on page 44.)
Restoring the Default Settings
The Reset All option lets you return all the projector settings to their
default values.
Select
Reset All and press the Select button to display the
confirmation screen. Select
Yes to reset all the default settings or No
to cancel. Then press
Esc.
SYNC Mode
Video
Setting
Advanced
About
Lamp
Reset Lamp Timer
Video Source
Input Signal
Frequency
SYNC Polarity
Resolution
Refresh Rate
Select Enter
Reset All
H kHz
V Hz
H
V
x
Hz
Execute
0H
Video
Setting
Advanced
About
Reset All
Select Enter
Execute