Filter
Top Products
2 • Using the Projector
70
If you need to raise or lower the image on the screen, extend or retract
the two feet at the bottom of the projector as follows:
1. Stand behind the projector and support the front of it while you
lift up on the foot adjust levers, located above the feet. This
unlocks the adjustable feet so they can move up and down. Don’t
let the projector drop.
Caution: Don’t hold or lift the projector by its lens. This can damage
the lens.
2. While lifting the levers, raise or lower the projector until the screen
image is correctly positioned.
3. Release the levers to lock the feet in their new position.
4. If you want to fine-tune the height of the projector, turn the
adjustable feet clockwise to raise the height, and counterclockwise
to lower the height.
80009000.book Page 70 Monday, November 1, 1999 9:35 AM