Filter
Top Products
Pressure Systems, Inc. 98RK-1 & 9816 User’s Manual©
Page 40 www.PressureSystems.com
3.1.5.6 Other Functions
Some commands may be used at any time to obtain information about the internal setup and
status of a module. The Read Module Status ('q') command is an example. Also, the Set
Operating Options ('w') command, though generally used after power-up reset, may also be
used at other times as well to change system operation. The actual feedback position status of
internal valves, and several temperature status conditions, may be configured to be periodically
delivered to the host automatically in any of the three autonomous streams configured by the 'c'
command.