Filter
Top Products
6-9
CrossPoint 450 Plus and MAV Plus Switchers • HTML Operation
PRELIMINARY
Email Settings page
Reach the Email Settings page (fi gure 6-7) by clicking the Email Settings link on
the System Confi guration page. The Email Settings page has fi elds for setting up
the switcher BME 0’s e-mail notifi cation capabilities. For the e-mail settings and
for each row of the e-mail notifi cation settings, click the Edit button to make the
fi elds available for editing. The button changes to Save. After editing the settings
associated with the Edit/Save button, click the Save button.
Refresh
Select Firmware Upgrade
Select System Configuration
Select Passwords
Figure 6-7 — Email Settings page
Mail IP Address fi eld
The Mail IP Address fi eld displays the IP address and the domain name of the mail
server that handles the e-mail for the facility in which the matrix switcher BME 0 is
installed.
Valid IP addresses consist of four 1-, 2-, or 3-digit numeric subfi elds separated by
dots (periods). Each fi eld can be numbered from 000 through 255. Leading zeroes,
up to 3 digits total per fi eld, are optional. Values of 256 and above are invalid.
Domain Name fi eld
The Domain Name fi eld displays the domain name that the matrix switcher
BME 0 uses to log on to the e-mail server. Standard domain name conventions (for
example: nnnnn@xxx.com) apply.
N
The following characters are invalid in a domain name:
{space} + ~ , = ‘ [ ] { } < > ’ “ ; : | \ and ?. The @ character is only
acceptable as the lead-in to the domain name (such as @folklore.net).