Filter
Top Products
IPI 100 AAP, IPI 200 AAP Series • Installation
2-5
Mounting the IPI 201 or IPI 204 into an AAP
Wall Plate or Device Faceplate
The IPI 201 and IPI 204 intercoms must be attached to a device
faceplate or AAP wall plate and cabled before the device or wall
plate is installed in a wall or furniture. Unlike the IPI 100 Series
intercoms, the IPI 200 AAP Series intercoms are secured by
attaching a clamp bracket to the back of the intercom after it has
been inserted through the front of the AAP plate.
1. Before cables are attached, insert the IPI through the front
of the device’s faceplate or AAP mounting frame. Secure
the IPI to the faceplate/wall plate by attaching the
provided clamp bracket.
2. Connect cables to the IPI. See “IPI Rear Panel Features and
Cabling” on page 2-6.
3. Mount the AAP mounting frame or other device to
the wall, furniture, or rack panel. Follow any special
mounting instructions that came with that device.
Extron
IPI 204 AAP
Intercom
(rear view)
Clamp Bracket
(included)