Filter
Top Products
IPI 100 Series, IPI 200 Series • Programming and Control
5-15
Command ASCII (Telnet)
(host to intercom)
URL Encoded (Web)
(host to intercom)
Response
(intercom to host)
Additional
description
IP setup commands
Set the unit
name
24
E X1@
C N
}
W
X1@
CN
|
Ipn•
X1@ ]
Change the IPI’s name to
one of your choosing (
X1@
),
such as “AuditoriumIPI”,
“Rm316-AVcenter”, or
“exec-boardroom-ctrl”. The
name consists of up to 24
alphanumeric characters (and
the minus sign). The rst
character must be a letter,
the last character cannot be a
minus sign (hyphen). Case
does not matter.
Set unit name to
factory default
24
E
•CN
}
W%20CN
|
Ipn•
X4( ] X4(
= the name the IPI
was shipped with: IPI 104
-##-##-##, a combination of
the model name and the last
3 pairs of hex numbers in the
controller’s MAC address
(e.g., IPI-104-IP-00- 02-3D).
Read the unit
name
E
CN
}
WCN
| X1@ ]
or
X4( ] X1@
is the IPI’s current, user-
dened unit name.
X4(
is the IPI’s factory
default name.