Filter
Top Products
IPI 100 Series, IPI 200 Series • Quick Start Guide
Quick Start Guide — IPI 101, IPI 104, cont’d
QS-2
Step 7
Install each MLC 226 IP and IPI into the wallboxes you installed in
step 2 above.
Step 8
Connect the console PC(s) to the network.
Step 9
Connect the PC(s) and MLC(s) to power sources and turn on the
PC(s).
Step 10
Congure the MLC 226 IP. Refer to the MLC 226 IP User’s Manual
and the Global Congurator help le for instructions.
Step 11
Install the Extron IP Intercom HelpDesk
™
software on a PC. See page
4-2 for software installation instructions.
Step 12
Use the IP Intercom HelpDesk software and Conguration Utility
to congure all IPI units that are part of the system. See “Setup
procedure” on page 4-20 of this manual for instructions on
conguring the IPIs.