Filter
Top Products
IPI 100 Series, IPI 200 Series • Programming and Control
5-17
Command ASCII (Telnet)
(host to intercom)
URL Encoded (Web)
(host to intercom)
Response
(intercom to host)
Additional
description
Set daylight
saving time
24
E X3$
C X
}
W
X3$
CX
|
Ipx
X3$
]
X3$
= Daylight saving time (DST) is a region-specic 1-hour offset that begins in spring and ends in fall.
0 = off/ignore
1 = USA on – starts on the rst Sunday of April at 2 am and ends on the last Sunday of October. For example, time
in California is GMT -8:00 from April to October and GMT -7:00 from November to March. However, in 2007 DST
starts on the second Sunday in March and ends the rst Sunday in November. DST should be turned off in Hawaii,
American Samoa, most equatorial regions, Guam, Puerto Rico, the Virgin Islands, the eastern time zone portion of the
state of Indiana, and the state of Arizona (excluding the Navajo Nation).
2 = Europe on – begins on the last Sunday in March, ends on the last Sunday in October. DST should be turned off in
Iceland.
3 = Brazil on – begins on the last Sunday in October, ends on the third Saturday in March. This varies from year to
year.
Read daylight
saving time
E
CX
}
W CX
| X3$
]
Set DHCP on
24
E
1
DH
}
W1DH
|
Idh
1
]
Set DHCP off
24
E
0
DH
}
W0DH
|
Idh
0
]
N
Changing DHCP from on to off also resets the IP address to the factory default (192.168.254.254).
View DHCP
mode
E
DH
}
WDH
| X%
] X%
= 0 (off) or 1 (on).
Set IP address
24
E X1$
C I
}
W
X1$
CI| Ipi•
X1$
] X1$
= IP address (xxx.xxx.
xxx.xxx). Leading zeros in
each of the four elds are
optional in setting values.