Filter
Top Products
4-9
IPL T S Series • Communication and Control
Command ASCII (Telnet)
(host to unit)
URL Encoded (Web)
(host to unit)
Response
(unit to host)
Additional description
Firmware version, part number and information requests
N
In a query response, an asterisk (*) after the version number indicates the version that is currently used.
A question mark (? or ?.??) indicates that the factory default firmware is the only firmware loaded in the IPL T S unit.
A carat (^) indicates the version of firmware that should be running, but, since a mode 1 reset was performed, the factory default firmware version is loaded and running instead.
An exclamation point (!) indicates that the firmware is corrupted.
N
Responses to commands differ depending on which, if any, verbose response mode the IPL T S device is in. See the CV command (
E
X2@
CV
}
) under IP setup commands later in
this table.
Query firmware
version
Q or 1Q Q or 1Q
X1!]
or Ver01*
X1!]
Show the IPL T S unit’s firmware version
(
X1!
) to two decimal places. This query
yields the number of the currently running
version of the user-updatable firmware.
Example:
1Q 1Q 1.01
or Ver01*1.01
Query verbose
firmware version
information
0Q 0Q Sum of responses from 2Q-3Q-
4Q
]
or Ver00*sum of responss from
2Q-3Q-4Q
]
Show the bootstrap, factory-installed, and
updated firmware versions.
See 2Q, 3Q, and 4Q below.
Example:
0Q 0Q 1.03-1.00(1.18-IPL Series -Thu, 20 Jan 2005 09:41:47 GMT)-1.01*(1.31-IPL
Series -Tue, 14 Jun 2005 00:54:58 GMT)
]
Query bootstrap
firmware version
2Q 2Q
X1!]
or Ver02*
X1!]
The bootstrap firmware is not user-
replaceable, but you may need this
information during troubleshooting.
Example:
2Q 2Q
1.03
]
Query factory
firmware version
3Q 3Q
X1!
(plus Web ver.-desc-UL
date/time)
]
or Ver03*
X1!
(plus Web ver.-
desc-UL date/time)
]
Factory-installed firmware is different from
the bootstrap firmware, but it is also not user-
replaceable. This firmware was installed at
the factory; it is the version the controller
reverts to after a mode 1 reset (see ch. 2).
Example:
3Q 3Q
1.00(1.18-IPL Series -Thu, 20 Jan 2005 09:41:47 GMT)
]
In this example the factory firmware version
is 1.00 and the IP Link kernel version is 1.18
for the IPL T S unit, dated 20 January 2005.
Query updated
firmware version
4Q 4Q
X1!
(plus Web ver.-desc-UL
date/time)
]
or Ver04*
X1!
(plus Web ver.-
desc-UL date/time)
]
Use this command to find out which version
of the firmware, if any, was uploaded into
the controller after it left the factory.
Example:
4Q 4Q
1.01*(1.31-IPL Series -Mon, 28 Feb 2005 23:16:55 GMT)
]
In this example the current firmware version
is 1.01, the IP Link kernel version is 1.31, for
the IPL T S device, dated 28 February, 2005.