Filter
Top Products
• Power mode: The two Display buttons at the top of the front panel, labeled On
and Off, are permanently in power mode. This mode is similar to input mode.
The two Display buttons are mutually exclusive; if you press one, the other one
becomes unlit.
NOTE: You can also set up button macros using IR (see Setting Up Button
Macros Using IR on page 20).
To change the switch mode of a button (except the display buttons), you must use
the configuration software (see the configuration program help file for the procedure).
Front Panel Components
The following diagrams show the front panels of the standard and VC versions of all
MLC 52 models.
NOTE: The front panel buttons are prelabeled for convenience. You can relabel them
using the other labels that are provided (see Replacing Button Labels on page 10
for the relabeling procedure).
MLC 52
DISPLAY
ON
PC
VIDEO
OFF
VOL
VOL
MLC 52
DISPLAY
ON
PC
OFF
DVD
VCR
VOLUME
3
3
5
1
2
4
1
2
MLC 52 IR and RS
MLC 52 IR VC and RS VC
Figure 23. MLC 52 and MLC 52 VC Front Panels
MLC 52 MediaLink Controllers • Operation 28