Filter
Top Products
3. Program the input selection command “A” from the RGB 2 input selection button on
the projector remote control into memory block 2 of the MLC 52 PC button:
a. Press the PC button on the MLC front panel. The button blinks, indicating that the
MLC is ready to learn the command. On the rear panel, the second LED from the
bottom flashes.
b. Within 5 seconds (while the PC button on the MLC 52 is blinking), press the
RGB 2 button on the remote control. The MLC learns command “A” for RGB 2.
4. Program the input selection command “B” from the RGB 1 input selection button on
the projector remote control into memory block 3 of the MLC 52 PC button:
a. Press the PC button on the MLC front panel. The button blinks, indicating that the
MLC is ready to learn the command. On the rear panel, the third LED from the
bottom flashes.
b. Within 5 seconds (while the PC button on the MLC 52 is blinking), press the
RGB 1 button on the projector remote control. The MLC learns command “B” for
RGB 1.
5. Program the input selection command “B” from the RGB 2 input selection button on
the projector remote control into memory block 4 of the MLC 52 PC button:
a. Press the PC button on the MLC front panel. The button blinks, indicating that the
MLC is ready to learn the command. On the rear panel, the fourth LED from the
bottom flashes.
b. Within 5 seconds (while the PC button on the MLC 52 is blinking), press the
RGB 2 button on the remote control. The MLC learns command “B” for RGB 2.
6. If finished programming the MLC 52 buttons, return configuration DIP switch 1 to its
Off (down) position, and test the system.
If you want to program video input selection at this time, proceed to “Programming
video inputs — projector remote control type A.”
Programming video inputs — projector remote control type A
MLC 52
PROJECTOR
ON
PC
VIDEO
OFF
VOL
VOL
Command 1: Computer
The button should be in
input switch mode.
Projector Remote Control Type B
Command 2: Video
The button should be in
input switch mode.
SIZE
ENTERMENU
CENTER
CONT/
BRT
COL/
TINT
ASPECT
RATIO
VIDEO
MUTE
AUDIO
MUTE
A/V
MUTE
SHARP
PHASE
VIDEO
COMPUTER
Figure 37. Programming MLC 52 Input Selection Buttons from a Projector
Remote Control Type A
MLC 52 MediaLink Controllers • Special Applications 40