Filter
Top Products
Installing the Software from the DVD
To install the MLC 52 configuration software to your computer from the included Extron
Software Products DVD:
1. Insert the disc into your computer drive. The DVD should start automatically. If it does
not, open your Windows Explorer and double-click Launch.exe on the DVD drive to
start it.
2. On the Extron Software DVD screen, click the Software button (surrounded by a red
box in the illustration below).
Figure 41. Extron Software DVD Screen
3. On the Control Software screen, click the Install link at the right of the MLC 52
Series line.
Figure 42. Install Link on Software DVD
4. Follow the directions on the subsequent windows to complete the software
installation.
MLC 52 MediaLink Controllers • Serial Communication 47