Falcon RJ-6000 Series Printer User Manual


 
• Ink cartridges should be kept in a cool dark place. However, the
ink will freeze if it is stored for a long period below -10˚C for
black ink and below -10˚C for colored ink so storage under
these conditions should be avoided. If the ink becomes frozen,
it should be thawed for at least three hours at room tempera-
ture (25˚C) before use.
• Open the ink cartridge just before you load it into the slot.
Printing may be blurred if the ink cartridge is left open for a
long time.
• Printing may not be possible even though there is ink remain-
ing in the cartridge. Therefore, after an ink cartridge has been
installed, it should not be taken out and re-inserted until it
needs to be replaced by a new cartridge.
• Ink cartridges should be used within two years of the date that
is printed on the package. Cartridges that have been loaded
into the printer should be used up within six months.
• Condensation will occur if an ink cartridge has been moved
from a cold place to a warm place. It should not be used until it
has been left for at least three hours at room temperature and
the condensation has disappeared.
• Since capping will not occur unless the head is at the right
hand end, an ink leakage may occur. Therefore, the power
switch should not be turned off or the power cord disconnect-
ed during printing or while the head is moving.
33
RJ-6000 Series USER GUIDE Basic Edition
Ink Cartridge Precautions
Preparing for Printing
NOTE