Falcon RJ-6000 Series Printer User Manual


 
Waste ink accumulates in the waste box at the back of the printer. When the
waste box is full, "Full Waste Ink Tank" is displayed and printer's printing oper-
ation ceases. The waste liquid absorbent sheet/waste liquid box must be
replaced.
• The used waste liquid absorbent sheet and waste liquid box
(case) should be disposed of as non-combustible material in
accordance with your local civic regulations.
• It would dangerous for children to lick or swallow the
absorbent sheet filled with waste liquid, so dispose of it
promptly or put it out of reach.
• If you accidentally touch the waste liquid, wash with soap and
water at once.
• If it should enter your eye, wash with plenty of water and see a
doctor. If it is licked, gargle with water and wash out straight
away. If it is swallowed, immediately drink plenty of water and
consult a doctor without delay.
If this message appears you
should prepare as replacement
waste liquid absorbent sheet/
waste liquid box.
If you continue with this message displayed
Printing stops when this mes-
sage appears. Therefore it will
not be possible to continue to
use the printer unless the waste
liquid absorbent sheet/waste
liquid box is replaced.
• If the waste box has been pulled out by mistake, leave the
"Change Tank? No" display as it is and press [ENTER].
• Leave the printer switched on while you replace the waste liq-
uid absorbent sheet/waste liquid box.
Replacing Waste Liquid Absorbent Sheet (Waste Box)
84
RJ-6000 Series USER GUIDE Basic Edition
CAUTION
Check Waste Ink
Ful lWas te InkTank
NOTE