Filter
Top Products
Fluke 434/435
Users Manual
4-4
Highlight baudrate: .
Adjust the required transmission speed.
Highlight the Printer type you want to use: .
ENTER
Press to confirm the selection.
F5
Press to return to the next higher menu SETUP USER
PREF. This menu is the starting point for many adjustments
such as Display Contrast Adjustment and Reset to Factory
Defaults.
Display Contrast
Use submenu SETUP USER PREF as a starting point. How to get there is explained
above under Menu Navigation:
Adjust the Display Contrast to your personal taste.
Reset to Factory Defaults
Proceed as follows to reset the Analyzer to factory default settings. Bear in mind that
recorded data and adjustments will be lost.
Use submenu SETUP USER PREF as a starting point. How to get there is explained
above under Menu Navigation:
F1
Press to start the reset to default settings. Because of the risk
of unwanted erasure of data, a confirm menu pops up.
F5
Press to confirm the reset.
Proceed as follows to reset the Analyzer to factory default settings without loss of data:
turn power off, then press and hold SAVE SCREEN and turn on again. You should hear a
double beep.