Filter
Top Products
116 Operating Manual BX400 S1
Hot-plug components
© cognitas. Gesellschft für Technik-Dokumentation mbH 2009 Pfad: C:\Programme\FCT\tim_app\tim_local\work\WALTER\OBJ_DOKU-9249-003.fm
Installing a double-width connection blade (Infiniband)
V CAUTION!
Make sure you observe the safety notes and the information on handling
electrostatic-sensitive devices in the section "Modules with Electrostatic-
Sensitive Devices" on page 32.
Ê Unpack the Infiniband connection blade.
Figure 39: Removing the separating clip
I Because of the double width of these connection blades, you must
remove the separating clip between the two slots of fabric 3 before you
install the connection blade.
Ê Remove the separating clip by pressing the little black lever (1) to the left and
pulling out the separating clip (2).
/
0