Filter
Top Products
40 Operating Manual BX400 S1
Installing the hardware
© cognitas. Gesellschft für Technik-Dokumentation mbH 2009 Pfad: C:\Programme\FCT\tim_app\tim_local\work\WALTER\OBJ_DOKU-9245-003.fm
4.4 Installing/removing the rack model
V CAUTION!
● Follow the safety instructions in chapter "Important notes" on page 25
and section "Notes on installation into the rack" on page 34.
● Because the PRIMERGY BX400 S1 system unit is large and heavy,
at least two people are needed to safely mount it in the rack or
remove it from the rack. (For the Japanese market, please refer to "
安全上のご注意 ".)
● The rack may tip over if more than one unit is removed at the same
time.
4.4.1 Rack system requirements
The rack systems from Fujitsu PRIMECENTER Rack, DataCenter Rack and
19-inch standard rack (for the Japanese market) support the installation of
PRIMERGY servers. Installation in most current rack systems from other
manufacturers (3rd party racks) is also supported.
To accommodate the ventilation concept and ensure proper ventilation, any
unused areas in the rack must be sealed using dummy covers.
The power is supplied via the multiple socket outlets fitted in the rack.
Fujitsu rack systems
The main features of PRIMECENTER Rack, DataCenter Rack and 19-inch
standard rack (for the Japanese market) are as follows:
– support systems having a linear alignment feature to ensure that they can
be adjusted to different rack depths
PRIMECENTER Rack and DataCenter Rack provide an enhanced cable
management in the lateral rack area.
I For PRIMECENTER Racks and DataCenter Racks:
The mounting of the rails in the different racks is described in the next
sections. Installation of the cable management is described in detail in
the Technical Manual for the respective rack.