Filter
Top Products
48 Operating Manual BX400 S1
Installing the hardware
© cognitas. Gesellschft für Technik-Dokumentation mbH 2009 Pfad: C:\Programme\FCT\tim_app\tim_local\work\WALTER\OBJ_DOKU-9245-003.fm
Figure 7: Installing the system unit
Ê Push the system unit into the rack as far as it will go.
Ê Fasten the system unit to the rack using the two knurled screws.
Ê Reinstall the server blades, storage blades, connection blades and
management blades, power supply units, fan units and dummy modules in
their old bays, see page 46. For assembly instructions see chapter "Hot-
plug components" on page 81.
V CAUTION!
Incorrect fitting of the system unit may lead to serious errors.
Removing the system unit
V CAUTION!
● Make a note of the positions of the individual server blades, storage
blades, connection blades, power supply units and fan modules in the
system unit for reinstallation.
To remove the system unit, follow the installation instructions in reverse.