Filter
Top Products
70 Operating Manual BX400 S1
Installation and operation
© cognitas. Gesellschft für Technik-Dokumentation mbH 2009 Pfad: C:\Programme\FCT\tim_app\tim_local\work\WALTER\OBJ_DOKU-9246-003.fm
Network If DHCP is activated (default), the obtained network data is
displayed. Otherwise you can specify the network data manually:
– IP Address
– Subnet Mask
– Gateway
IPv4 settings
– IPv4 enable
– Obtain IP address from DHCP
– Obtain DNS address from DHCP
– DNS server 1
– DNS server 2
IPv6 settings
– IPv6 enable
– Obtain IP address from DHCP
– Obtain DNS configuration from DHCP
– DNS server 1
– DNS server 2
I/O Contains basic configuration settings for the Front-Side I/O
Module (FSIOM) and the connection blades:
FSIOM settings
– Select server blades for using USB port and DVD drive
Connection blade settings (management port IPv4):
If DHCP is activated (default), the obtained network data is
displayed. Otherwise you can specify the network data manually:
– IP Address
– Subnet Mask
– Gateway
Connection blade settings (management port IPv6):
– IPv6 enabled (OFF)
– DHCP enabled (OFF)