98 Appendix
Backlight Control Color Reflective Display (indoor/outdoor):
Low-Medium-High-Off (via hotpad)
Color Transmissive Display (indoor only):
Very Low-Low-Medium-High (via hotpad)
The backlight control defaults to last setting used.
VGA Controller 16-bit with hardware acceleration
VRAM 1 MB SDRAM
Interface Specifications
PC Card Slots • Two Type-II
• PCMCIA version 2.1
• 5 V/3.3 V, 500 mA maximum power
•“Radio Ready” for WAN PC Card radios
Modem • The internal modems on all Fujitsu pen tablets from
Fujitsu PC Corporation are only qualified for use with
telephone systems in selected countries, including the
United States and Canada. For a full list of certified
countries, check www.fujitsupc.com/modems.
• RJ-11 jack on top of system
• Ring wakeup (internal or PC Card modem)
Integrated Interfaces • USB-Host (Type-A connector)
5 V, 500 mA maximum current
• PS/2-style keyboard (full-size, 6-pin DIN connector)
5 V, 500 mA maximum current
• RS-232C serial port (full-size DB-9 connector)
Note that Pin 9 on this serial port has 5 V, 500 mA
maximum current support; Pin 9 on the optional docking
station serial port does not support 5 V.
• RJ-11 modem jack
• DC Power
Infrared IrDA version 1.1 (FIR, 4 Mbps)
PenCentra 200 Specifications (Continued)