Filter
Top Products
106 Safety, Regulatory, and Notices
Regulatory compliance statements
Rack Mounting
If rack mounted units are installed in a closed or multi-unit rack assembly, they may require
further evaluation by Certification Agencies. The following items must be considered:
■
The ambient within the rack may be greater than room ambient. Installation should be such
that the amount of airflow required for safe operation is not compromised. The maximum
temperature for the equipment in this environment is 50C, unless otherwise specified in the
environmental specifications for the equipment. Consideration should be given to the
maximum rated ambient.
■
Installation should be such that a hazardous stability condition is not achieved due to uneven
loading.
Input supply:
Check nameplate ratings to assure there is no overloading of supply circuits that could have an
effect on overcurtrent protection and supply wiring.
Grounding:
Reliable grounding of this equipment must be maintained. Particular attention should be given
to supply connections when connecting to power strips, rather than direct connections to the
branch circuit.
American users
FCC Part 15
This device has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio or television reception. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause
interference to radio and television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
■
Reorient or relocate the receiving antenna
■
Increase the separation between the equipment and receiver
■
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected
■
Consult the dealer or an experienced radio/TV technician for help.
■
Use only shielded cables to connect peripherals to the system.
Accessories: This equipment has been tested and found to comply with the limits of a Class A
digital device. The accessories associated with this equipment are: shielded video cable. These
accessories are required to be used in order to ensure compliance with FCC rules.
8506162.book Page 106 Wednesday, May 10, 2000 10:21 AM