Filter
Top Products
System Specifications 115
B
System
Specifications
The following specifications are for the standard configuration. The server
may contain optional equipment. All specifications are subject to change.
Case size 18.9 in. (480 mm) x 24.1 in. (612 mm) x 3.46 in. (88 mm)
Processors As many as two Intel
®
Pentium III™ processors operating at 600 MHz
and faster
Cache 256K on processor
RAM Four DIMM sockets support up to 2.0 GB of PC/100 SDRAM
BIOS Flash BIOS for easy updates from diskette
IDE interfaces Two PCI IDE controllers support as many as two ATAPI/IDE devices
each (hard drives or CDs) for a total of as many as four IDE devices.
(The chassis supports only the slimline CD drive.)
Diskette drive interface Diskette drive controller is integrated on the system board
I/O ports One parallel port, two serial ports, two USB ports, one PS/2 keyboard
port, one PS/2 mouse port, one RJ-45 network port
Power supply 275 W power supply
SCSI interfaces Integrated Adaptec AIC 7896 SCSI controller
Network interface Intel 82559 PCI ethernet controller
Server management Monitoring, alerting, and logging of critical system information obtained
from embedded sensors on the system board, including thermal levels,
voltage levels, fan speeds, and chassis intrusion monitoring.
Expansion slots Two 32-bit, 33 MHz PCI slots on the riser card
Drive Bays One slimline CD drive bay, one external 3.5-inch drive bay (occupied
by diskette drive), and four hot-plug bays (at least one is occupied by
a 1-inch high hot-plug drive).
8506162.book Page 115 Wednesday, May 10, 2000 10:21 AM