Filter
Top Products
18 Case Access
Opening the case
The only components that are accessible from the outside of the chassis are
the front panel indicator lights. To access any of the removable media drives,
the hot-plug drives, or the front panel buttons you must open the bezel. To
work on the internal components of the server, you must open the chassis.
Because the components inside the server are extremely sensitive to static
electricity, make sure you follow the precautions at the beginning of this
chapter to avoid static electricity damage.
Only qualified personnel should open the system for maintenance. If you are
qualified to maintain the system yourself, make sure you are properly
grounded before opening the system chassis.
Important All references to front, back, left, or right on the server are
based on the server being in a normal, upright position,
as viewed from the front.
Caution Avoid exposure to dangerous electrical voltages and
moving parts by turning off your server and unplugging the
power cord and modem cable (if installed) before removing
the chassis cover.
8506162.book Page 18 Wednesday, May 10, 2000 10:21 AM