Filter
Top Products
42 Replacing and Adding Internal Devices
5 Align the new processor with the processor slot. Note that the processor
slot is keyed so the processor can only be installed one way. Press it firmly
to install it.
6 Connect the processor fan cable to the secondary processor fan connector
on the system board (See “System board” on page 6 for location).
7 Close the case. (See “Closing the case” on page 20.)
8 Reconnect the power cord and all other cords you removed, then turn
on the system.
Important Gateway recommends that you run a processor retest from
the BIOS Setup utility whenever you replace or add a
processor.
8506162.book Page 42 Wednesday, May 10, 2000 10:21 AM