Filter
Top Products
52 Replacing and Adding Internal Devices
3 Open the power supply cover by removing the two screws that secure it
in place, then swing the cover up.
4 Holding the sides of the power supply, push it out through the back panel
of the chassis.
5 Insert the new power supply through the back panel, making sure that
the connectors on the power supply seat firmly in the connectors on the
power distribution board.
6 Close the power supply cover and replace the screws you removed in
Step 3.
7 Close the case. (See “Closing the case” on page 20.)
8 Reconnect the power cord and all external peripherals, then turn on the
system.
8506162.book Page 52 Wednesday, May 10, 2000 10:21 AM