Filter
Top Products
10. Touch Manual Settings.
11. Touch Default Gateway.
12. Touch the Default Gateway text box.
13. Use the touchscreen keyboard to type the default gateway.
14. Touch OK.
15. Touch Save.
Configure TCP/IPv6 parameters
The digital sender has limited IPv6 capability on a network. JetDirect Inside or any EIO JetDirect card
can connect to an IPv6 network, and the device can be viewed and configured through WebJet Admin
and the embedded Web server, but it currently has no capability to perform any type of digital sending
through IPv6. Digital send functionality is through IPv4 only. For information about configuring the device
for a TCP/IPv6 network, see the HP Jetdirect Print Server Administrator's Guide.
HP Jetdirect EIO print servers
HP Jetdirect print servers (network cards) can be installed in the EIO slot. These cards support multiple
network protocols and operating systems. HP Jetdirect print servers facilitate network management by
allowing you to connect a device directly to your network at any location. HP Jetdirect print servers also
support the Simple Network Management Protocol (SNMP), which provides remote device management
and troubleshooting through the HP Web Jetadmin software.
NOTE: Configure the card through the control panel, the device installation software, or
HP Web Jetadmin. Refer to the HP Jetdirect print server documentation for more information.
ENWW Network configuration 35