Filter
Top Products
42
System Components
3.5-inch diskette or CD/DVD drives
Removing and replacing the 3.5-inch diskette
or CD/DVD drive
To replace the drives:
1
Turn off the system and disconnect the power cord and modem cord (if
installed) and all other external peripheral devices.
2
Open the case by following the instructions on page 17. (See “Preventing
static electricity” on page 15.)
3
Remove the bezel, as described in “To remove the bezel:” on page 19.
4
Locate the 3.5-inch diskette or 5.25-inch CD/DVD drive.
5
Remove the power and data cables from the back of the drive, noting
their location and orientation. (You will reconnect these cables after you
install the new drive.)
05030.book Page 42 Monday, November 22, 1999 8:23 AM