Gateway E-5400 Personal Computer User Manual


 
52
System Components
Power supply
Removing and replacing the power supply
To remove the power supply:
1
Turn off the system and disconnect the power cord and modem cord, if
installed.
2
Open the case by following the instructions on page 17. (See Preventing
static electricity on page 15.)
3
Lay the case on its right side, if possible.
4
Locate and disconnect the power supply connectors from all internal
devices, including the 3.5-inch diskette drive, the CD-ROM drive and all
hard drives.
5
Locate and disconnect the main power supply connector to the system
board, by pressing on the tab to release the connector, then gently pulling
the connector from the board.
05030.book Page 52 Monday, November 22, 1999 8:23 AM